Digital Electronics PS-3651A Manuel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Digital Electronics PS-3651A. Digital Electronics PS-3651A 20 pages.

HDD Recovery Procedure

Use the following steps used to recover the Windows

Hard Disk.

(1) Turn on the power of PS-A and immediately press the [F2] key to enter the BIOS

setup screen. Insert the Recovery DVD into the DVD-ROM drive.

(2) On the [Boot] menu, move "USB CDROM" (the name of the DVD drive inserted the

Recovery Media) to the top of the screen using the [+] key or the [-] key.

(3) Press the [F10] key and select [Yes] for [Save configuration changes and exit now?]

to save the setting and restart the PS-A unit.

(4) After the PS-A unit restarts, the Symantec Ghost

(5) After the Symantec Ghost

"Partition sizes correct?"

(6) The volume displayed in New Size will be recovered. After confirming it, press the

[Yes] button. To change it, press the [No] button and go to the [Destination Drive

Details] dialog box. In the [Destination Drive Details] dialog box, change the size of

the New Size and press the [OK] button.

(7) The [Question] dialog box will appear. Press the [Yes] button. It will be reconfirmed

that the data of the hard disk is all reset to the original values at the time of delivery.

"Proceed with disk restore?

Destination drive will be permanently overwritten."

(8) The hard disk recovery program will start.

After the recovery operation finishes, the Symantec Ghost

the message "Please turn off computer" displayed, turn off the power of PS-A.

(9) Turn on the power of PS-A again and immediately press the [F2] key to enter the

BIOS setup screen.

(10) Press the [F9] key and select [Yes] for [Load default configuration now?] to set the

BIOS setting to the factory setting. Press the [F10] key to save the settings and

restart the PS-A unit.

(11) After the unit restarts, set up your OS.

SEE

• After performing hard disk recovery, the PS-A unit's hard disk is

returned to its factory shipped condition.

• For recovery, USB DVD-ROM drive on the market and USB

keyboard are required.

starts, the [Question] dialog box will appear.

4 OS Setup

XP Multi-Language Preinstalled

will automatically start.

also will finish. When