Digital Electronics Corporation APL3700-TA Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Digital Electronics Corporation APL3700-TA. Digital Electronics Corporation APL3700-TA 17 pages.

Imprimer la page
Serial Mode Select Switches (SW4 to SW10) operate as shown in the circuit diagram below.
SD(TXD)
RT(RTS)
RT(RTS) Automatic
control
2.
Internal switches of the front module
Rear face of the front module
Switch
Switch Name
Location
Touch Panel
SW1
Set SW
SW2
—
Touch Panel Set SW
Switch
Description
No.
1 to 2
Internal setting
3
Cancellation function
4
of two point touch on
the touch panel
*1
When two points are pushed, it is considered that middle point between the two points is touched
according to the nature of the analog resistive touch panel. When the switch, etc. is set on the middle
point, it will be enabled and may operate. To prevent such a switch from malfunction in case of pushing
two points, turn ON the SW No.4 in advance, then the middle point will be disabled for two point touch.
SW4
SW9
SW10
Factory
Settings
1:ON, 2:ON, 3:OFF, 4:OFF
1:ON, 2:OFF, 3:ON, 4:OFF
ON
OFF
Reserved Reserved
Enabled Disabled OFF
*1
SW5
SW7
SW6
ON
SW2
4-point dipswitch.
For Touch Panel Set SW details,
see " Touch Panel Set SW".
Internal setting.
Do not change. (Factory setting)
Factory
Settings
ON
Do not change. (Factory setting)
OFF
The middle point is not considered to be
touched when the SW is ON. It is considered
to be touched when the SW is OFF.
8
SDA
SDB
SW8
RDA
RDB
ON
SW1
Description
Notes