Digital Electronics Corporation PS-2000B Series Manuel d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Digital Electronics Corporation PS-2000B Series. Digital Electronics Corporation PS-2000B Series 17 pages. Windows 2000 multi language preinstalled hard disk unit
Également pour Digital Electronics Corporation PS-2000B Series : Manuel d'installation (16 pages)

Imprimer la page

Use the following steps when connecting the power cord to the PS-B's power

terminals.

1) Confirm that the PS-B unit's power supply is turned OFF.

2) Use a screwdriver to remove the Power Input Terminal Block's clear plastic

cover.

3) Unscrew the screws from the middle three(3) terminals, align the Ring Termi-

nals

and reattach the screws.

• Confirm that the wires are connected correctly.

• The torque required to tighten these screws is 0.5N•m.

• To prevent the possibility of a Ring Terminal short, use a Ring Terminal

that has an insulating sleeve.

4) Replace the Power Input Terminal Block's clear plastic cover.

Suggested Ring Terminal : RAV1.25-3 <made by JST>

Black

Max. 6.0 mm

White

Green/

Yellow

φ φ φ φ φ 3.2 mm or larger