Digital Equipment DECstation 5000 Model 200 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Digital Equipment DECstation 5000 Model 200. Digital Equipment DECstation 5000 Model 200 12 pages. R4000 series cpu upgrade
Également pour Digital Equipment DECstation 5000 Model 200 : Manuel (14 pages)

Imprimer la page

Shut Down the System Software

Follow these instructions to shut down your

system software (ULTRIX and UWS Ver-

sion 4.3A or later):

1. Enter this command at the superuser

prompt (#) to shut down the software:

# /etc/shutdown -h now

2. If you have just installed a new version of

software, enter the

printenv

the console prompt to show the location

of your software, for example:

>>printenv

3/rz0/vmunix -a

In this example the software is located on a

hard disk that is set to SCSI ID 0. Slot 3 is

the location of the disk drive.

You will need this information to boot your

software after you complete the upgrade.

Record the display here:

command at