Bitspower BP-RTFT200-DRGB2 Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bitspower BP-RTFT200-DRGB2. Bitspower BP-RTFT200-DRGB2 6 pages. Luminous fantasy led strip -digital rgb 2.0 (200mm)
Imprimer la pageNotice
Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage
which may damage the PC components, please perform a 24-hour leaking test with only the pump connected
to the power supply.
Bitspower reserves the right to change the product design and interpretations. These are subject to change
without notice. Product colors and accessories are based on the actual product.
When using leak tester on water cooling loop, in order to avoid product damage due to excessive pressure, the
input pressure should not exceed 0.5kg/cm2 (Bar). If the product is damaged due to
excessive pressure, it will be borne by the customer. Forbidden to use the leak teser when there is water in the
loop or the pump is runing.
Bitspower recommends that consumers add the Bitspower dye to distilled water or purified water for their
water-cooling liquid. If the consumer chooses different water-cooling liquids, the resulting impurities may
cause peeling of the coating on some of the hardware, water channels blockage by built-up residue, improper
operation of the water pump, water tank tube breakage, and o-rings deformation leading to leakage. Any
issues related to the use of inappropriate water-cooling liquid will be the responsibility of the consumer.
Do not turn on the pump if the reservoir is empty.
[ 2 ]