Digital Equipment MicroVAX 3100 Model 95 Informations sur l'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Informations sur l'installation pour {nom_de_la_catégorie} Digital Equipment MicroVAX 3100 Model 95. Digital Equipment MicroVAX 3100 Model 95 20 pages.

Imprimer la page

Step 8: Checking the Power-Up Test Results

The power-up test can take several minutes to complete, depending on the

number of installed options you have and on which default settings you use:

•

If the power-up test results on the screen are similar to the results in

Figure 1–1, the system has passed the power-up test. Go to step 9.

•

If the power-up test results on the screen are not similar to the results in

Figure 1–1, the system has not passed the power-up test. Go to substep 1.

Figure 1–1 Successful Power-Up Test Screen

KA55-A or KA51-A or KA56-A V2.6, VMB 2.15

Performing normal system tests.

74..73..72..71..70..69..68..67..66..65..64..63..62..61..60..59..

58..57..56..55..54..53..52..51..50..49..48..47..46..45..44..43..

42..41..40..39..38..37..36..35..34..33..32..31..30..29..28..27..

26..25..24..23..22..21..20..19..18..17..16..15..14..13..12..11..

10..09..08..07..06..05..04..03..

Tests completed.

>>>

Central Processing Unit (CPU) name, Firmware version number, and

Virtual Memory Boot (VMB) version number

Read-Only Memory (ROM) based diagnostics countdown

Status message

Console prompt

1. Write down the error messages and the error summaries. Figure 1–2

shows an example of an error message and an error summary.

2. Set the on/off switch to the off (O) position.

3. Make sure that all the connections you made in step 3, step 4, step 5, and

step 6 are correct.

4. Set the on/off switch to the on ( | ) position.

5. If an error report is still displayed, see the MicroVAX 3100 Model 85/95/96

Troubleshooting and Diagnostic Information manual.

1–8 Installation Procedure