Digital Equipment AlphaServer 1000 Informations sur la mise à niveau - Page 8
Parcourez en ligne ou téléchargez le pdf Informations sur la mise à niveau pour {nom_de_la_catégorie} Digital Equipment AlphaServer 1000. Digital Equipment AlphaServer 1000 15 pages. Cpu upgrade
Également pour Digital Equipment AlphaServer 1000 : Informations sur l'installation (8 pages)
Imprimer la page
Upgrading an AlphaServer 1000 System
Upgrade Kit Inventory
The AlphaServer 1000 upgrade kit contains the following items:
CPU module
Antistatic wrist strap
Firmware diskette
Conversion label
Return mailing label
Digital UNIX licensing agreement
OpenVMS licensing agreement
Upgrade guide
Preparing the System
To prepare your system for the upgrade:
1. Check your firmware version number. A firmware version of 3.0-15 (SRM) or 4.26
(ARC) or higher is required to properly display the model number on the operator
control panel. The part number for the firmware update (Version 5.1) is AG-
TTMWQ-BE. This version is included on the firmware diskette shipped with the
upgrade kit.
2. Shut down the operating system following the instructions listed in the operating
system documentation.
3. Set the On/Off switches on all external options connected to the system to the off
position.
4. Set the On/Off switch on the system unit to the off position. An interlocking sensor
switch inside the system unit will automatically turn off the system if you remove the
top cover and have not turned off the system.
Removing Top Cover and Side Panels
To remove the top cover and left side panel, refer to Figure 1 and follow steps 1 through 4.
2
Caution: Do not disconnect the system unit power
cord or unplug the power cord from the power supply
socket. The power cord grounds the system unit,
preventing damage to the internal components.