Bittel HWD9888TSD-S Manuel de l'utilisateur - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Bittel HWD9888TSD-S. Bittel HWD9888TSD-S 5 pages.
Imprimer la page
2. Installation
Kindly view the schemas and do following installation carefully
one by one.First please connect the T-Cable's power jack
(Marked 1 in the below figure) with the power adaptor. Then
please connect the T-Cable's RJ11 (4 pin. Marked 2 in the
below figure) with the telephone line jack in the room. Finally
please connect the T-Cable's RJ11 port (6 pin. Marked 3 in the
below figure) to telephone set's "TO TEL" port, which is on the
back of the phone.
Then install the charge battery into the Handset, open the battery
cover of Handset and insert the battery plug into the socket. Pay
more attention to the polarity then put the cover on the battery box.
When user chooses new battery also need to care the polarity.
SCHEMAS ---- HWD38TSD-S (One line)
24
25
R
1
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
*
0
#
HOLD
11
10
13
12
1. Memory keys
2. Charge Indicator
3. Digital keys of the base
4. In USE Indicator- Indicator for cordless handset and base off-hook state
5(6). VOL—Adjust the volume of the reception when the base is off-hook
and the volume of ringer when the base is on-hook
7(22). SPKR-speaker key
8. REDIAL –Redial the last dialed number, which will disappear in five
minutes and call the handset when the base is on-hook
9(19). FLASH – The default is 600ms.
10. MWL-Message waiting Light
12 (23). MUTE
13(15). HOLD
14. ON—Press it to start turn on the handset
16. Off button—press it to turn off the handset
17. Digital keys of the handset
20(21) VOL—Adjust the volume of the reception when the handset is off-
hook and the volume of ringer when the handset is on-hook
24. DATA Port
25. To Tel port—connect the T-cable.
14
15
16
ON
HOLD
OFF
1
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
17
1
7
8
9
TUV
0
#
18
19
FLASH
VOL+
2
20
SPKR
VOL-
MUTE
3
21
4
22
5
23
6
7
8
9
SCHEMAS----HWD38TSD-T (Two line)
R
15
1. Memory keys
2(4). VOL—Adjust the volume of the reception when
the base is off-hook and the volume of ringer when
the base is on-hook
3.Charge Indicator—It will light when the handset is
charging
5 (25). MUTE button
6. In USE Indicator- Indicator for cordless handset and
base off-hook state
7. Redial--Redial the last dialed number, which will
disappear in five minutes and call the handset when
the base is on-hook
8(24)). SPKR
9. CONF-Conference button
10(18). LINE 2
11.SPKR-Speaker
12. MWL-Message waiting Light
13(16). LINE 1 Button
14(17). HOLD
15. Digital button of the base
19. Digital button of the handset
20. CONF Button of the handset—On-hook, this button
can achieve redial feature and when it's off-hook, it
can be used to adjust the ringer volume.
21. FLASH – The default is 600ms.
22(23).VOL-- Adjust the volume of the reception when
the handset is off-hook and the volume of ringer
when the handset is on-hook
26. DATA Port
27. To Tel port—connect the T-cable.
3. Operation
3.1Off-hook
a. For One-line phone, pick up the handset, or press
SPKR of the Base or the handset, or press ON key of
Handset.
b. For two-line model, pick up the handset or press
SPKR key or the relevant LINE button of the base or
handset.
Note: Without outside power, if the PBX's current is
higher than 35mA, the base of one-line phone and, the
LINE 1 of the base of two-line phone can work through
the Speaker.
---- Page 2----
26
27
LINE1
HOLD
LINE2
1
2
3
ABC
4
5
6
GHI
JKL
1
7
8
9
TUV
0
2
1
2
3
FLASH
VOL+
ABC
DEF
3
MUTE
SPKR
VOL-
4
5
6
4
GHI
JKL
MNO
7
8
9
5
PQRS
TUV
WXYZ
6
*
0
#
7
8
12
11
9
14
13
10
16
17
18
DEF
MNO
19
#
20
21
22
23
24
25