Bittel UNO Media HA9888(68)TSD-S Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Bittel UNO Media HA9888(68)TSD-S. Bittel UNO Media HA9888(68)TSD-S 14 pages. Uno media series
Également pour Bittel UNO Media HA9888(68)TSD-S : Manuel de l'utilisateur (12 pages)

Imprimer la page

Adjust Time

●After above setting, press TIME PROG or DST PROG at the right upper

direction within 10cm near the base LCD to adjust the TIME or DST Time.

Conversion of 12- Hour Format and 24- Hour Format

●When LCD display time, press TIME SET over 2 seconds to realize the

conversion.

Note: If the attached Remote Time Control is different than above image, please

according to the attached object.

Maintenance and troubleshooting

1. No dialing tone of handset

Check the telephone network,

Check the connection of handset cord and straight line cord

2. No ringing or no continually ring

Check the telephone line

Check the quantity of parallel phone set

3. Noise during talk

Check the telephone line

Check the handset cord

4. No caller ID

Check if the caller ID feature open.

Check the power supply

Acoustics no sound

Check the device connect to power or not

Check the 10pins ribbon cable and AUDIO CONNECTION

6. No signal or nersy noise after radio selected the channel

Adjust the direction of the radio antenna

No the selected channel in local

FCC APPROVAL

Complies with Part 68 of the FCC rules. On the bottom of this telephone is a label

that contains, among other information, the FCC registration number and the

ringer equivalence number (REN) for this telephone. If requested, you must

provide this information to the Telephone Company.

CE APPROVAL

Complies with CE approval.

JACKS

Uses RJ11C USOC standard modular jacks.

_______________________________________________________________________

_STH Europe

Page 13 of 14

UNO 67 68 SERIES