Digital Equipment Prioris XL 5166 Manuel d'installation - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Digital Equipment Prioris XL 5166. Digital Equipment Prioris XL 5166 17 pages. Cpu powergrade kit
Imprimer la page
4. Select Save and Exit to configure your server for the CPU module.
5. When complete, remove the SCU diskette from drive A and reboot your
server.
Refer to Chapter 3, "Server Utilities," in your computer user's guide for any
additional information on running the SCU.
Troubleshooting
Using the Crisis Recovery Diskette if Necessary
The Crisis Recovery diskette may be used only if your computer's BIOS fails or if
a BIOS upgrade is unsuccessful.
When using the Crisis Recovery diskette, you must remove any video option card
and enable the onboard VGA.
1. Turn off the server and make sure that the Onboard VGA jumper (J17, Figure
1) is installed (enabled).
2. Install a jumper on J39 (Figure 1) to set it to Recovery mode.
3. Insert the Crisis Recovery diskette into drive A and reboot the computer.
NOTE:
Normal mode after using the Crisis Recovery diskette.
Bulletin Board Access
For future reference, you can access product information and software updates
using the Internet at:
http://www.windows.digital.com
http://www.windows.digital.com/~ftp/00-index.htp
You can also access software updates through Digital's Bulletin Board Service
(BBS) by calling in the United States 508-496-8800.
Remember to remove jumper J39 to return it to
Prioris XL and XLDP Server Powergrade Kit
13