Digital Equipment PrintServer 32 Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Digital Equipment PrintServer 32. Digital Equipment PrintServer 32 6 pages. Controller firmware version 3.6 upgrade
Également pour Digital Equipment PrintServer 32 : Manuel de l'opérateur (20 pages)

Imprimer la page

Installing the Firmware

Software

Requirements

Kit Contents

Tool

Requirements

Caution

Version 3.6 of the controller ﬁrmware ROM chips can be installed

in a turbo PrintServer 20 printer or a PrintServer 32 printer.

This version is required when:

• Booting from NetWare

• If the current ﬁrmware version is older than Version 3.1 and

booting is from one of the following:

–

SCO

–

AIX

–

HP-UX

–

Solaris

The upgrade kit (order number 4A–LPS2X–FW) contains:

• ROM chips (2)

• Antistatic wrist strap

• This document

The procedure for installing the Version 3.6 controller ﬁrmware

requires the following tools:

• Flat surface — for working on the controller board

• Phillips head screwdriver — for loosening and tightening

captive screws

• Flat blade screwdriver — for extracting ROM chips

• Antistatic wrist strap — for preventing damage to electronic

components

Your upgrade kit includes an antistatic wrist strap.

Take these precautions while performing the installation

procedure:

• Static electricity can damage electronic components on

the controller board. Use an antistatic wrist strap to

ground yourself to a metal object.

• Work on a ﬂat surface to keep from bending the

controller board.

• Be careful not to gouge any components on the

controller board with the screwdriver.

• Be careful when handling the ROM chips. The pins

bend easily and damage is not covered by warranty.

Installing the Firmware

–

SGI

–

Sequent

–

Pyramid

–

UNISYS