Siemens SIMATIC ET 200AL Manuel - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 38 pages. 10-link digital output module dq 8x24vdc/2a 8xm12
Également pour Siemens SIMATIC ET 200AL : Manuel (38 pages), Manuel (50 pages), Manuel (32 pages), Manuel (37 pages), Manuel de l'équipement (46 pages), Manuel (26 pages), Manuel de l'équipement (28 pages), Manuel de l'équipement (27 pages), Manuel (25 pages)

Imprimer la page

5.2

Interrupts

5.2.1

Evaluating interrupts

Introduction

Interrupts are triggered by the IO device in case of errors. Interrupts are evaluated based on

the I/O controller used.

Evaluating interrupts with I/O controllers

The ET 200AL distributed I/O system supports the following interrupts:

● Diagnostics interrupts

● Hardware interrupts

● Pull/plug module interrupt

In the event of an interrupt, interrupt OBs are automatically called in the CPU of the

IO controller.

Information on the cause and class of the error is already available, based on the OB

number and start information.

Detailed information on the error event can be obtained in the error OB using the instruction

"RALRM" (read additional interrupt information).

System diagnostics

In STEP 7 (TIA Portal), the updated system diagnostic is available for the modules of the

S7-1500 automation system (IO controller CPU S7-1500) and ET 200AL (IO device).

Independent of the cyclic user program, messages are made available on the display of the

CPU S7-1500, the CPU web server and the HMI device.

You will find more information on systemic diagnostics in the Function Manual Diagnostics

(http://support.automation.siemens.com/WW/view/en/59192926).

5.2.2

Trigger a diagnostics interrupt

For an incoming or outgoing event (for example, wire break on a channel of an I/O module),

the interface module triggers a diagnostics interrupt if the parameters were assigned

accordingly.

The CPU interrupts the processing of the user program and processes the diagnostics

interrupt OB (OB 82). The event that triggered the interrupt is entered in the start information

of the diagnostics interrupt OB.

Interface module IM 157-1 PN (6ES7157-1AB00-0AB0)

Manual, 12/2016, A5E32347036-AD

Interrupts, error messages, diagnostics and system alarms

5.2 Interrupts