Siemens simatic ET 200MP Manuel - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens simatic ET 200MP. Siemens simatic ET 200MP 40 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens simatic ET 200MP : Manuel (24 pages), Manuel (29 pages), Manuel (47 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (30 pages), Manuel (25 pages), Manuel (42 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (39 pages), Manuel (28 pages), Manuel de l'équipement (35 pages), Manuel de l'équipement (32 pages), Manuel (29 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

Wiring

This section contains the block diagram of the module and outlines various connection

options.

You can find information on wiring the front connector, creating a cable shield, etc. in the

Wiring section of the system manual S7-1500/ET 200MP

(https://support.industry.siemens.com/cs/ww/en/view/59191792).

Note

You may use and combine the different wiring options for all channels.

Do not insert the potential jumpers supplied with the front connector.

Abbreviations used

+/S

L+

ANA

Pin assignment for the power supply element

The power supply element is plugged onto the front connector for powering the analog

module. Wire the supply voltage to terminals 41 (L+) and 44 (M). Use terminals 42 (L+) and

43 (M) to loop the potential to the next module.

Figure 3-1

Analog output module AQ 4xU/I ST (6ES7532-5HD00-0AB0)

Manual, 09/2016, A5E03484696-AD

Voltage output channel

Current output channel

Sense line channel

Connection for supply voltage

Ground connection

Reference potential of the analog circuit

Power supply element wiring