Siemens simatic ET 200MP Manuel - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens simatic ET 200MP. Siemens simatic ET 200MP 47 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens simatic ET 200MP : Manuel (40 pages), Manuel (24 pages), Manuel (29 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (30 pages), Manuel (25 pages), Manuel (42 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (39 pages), Manuel (28 pages), Manuel de l'équipement (35 pages), Manuel de l'équipement (32 pages), Manuel (29 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

Product overview

2.2 Functions

Prioritized startup

Prioritized startup denotes the PROFINET functionality for accelerating the startup of IO

devices operated in a PROFINET IO system with RT communication.

The function reduces the time that the correspondingly configured IO devices require to

return to the cyclic user data exchange in the following cases:

● After the supply voltage has returned

● After a station has returned

● After activation of IO devices

Note

Dependency on the startup time

The startup time depends on the number and type of modules. You can optimize the

startup time by

• inserting no more than 12 I/O modules

• inserting no power supply module.

The prioritized startup function with the requirements listed in the note above is not available

for IRT communication and media redundancy.

You can find additional information in the STEP 7 online help and

● as of STEP 7 V12, in the PROFINET with STEP 7 V14

(https://support.industry.siemens.com/cs/ww/en/view/49948856) function manual.

● as of STEP 7 V5.5 in the PROFINET System Description

(http://support.automation.siemens.com/WW/view/en/19292127) manual.

Cabling with fixed connection setting

If you set a fixed connection setting of the port in STEP 7, you should also deactivate

"Autonegotiation/Autocrossover".

You can find additional information in the STEP 7 online help and

● as of STEP 7 V12, in the PROFINET with STEP 7 V14

(https://support.industry.siemens.com/cs/ww/en/view/49948856) function manual.

● as of STEP 7 V5.5 in the PROFINET System Description

(http://support.automation.siemens.com/WW/view/en/19292127) manual.

Interface module IM 155-5 PN ST (6ES7155-5AA01-0AB0)

Manual, 11/2017, A5E03612323-AC