Siemens simatic ET 200MP Manuel de l'équipement - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens simatic ET 200MP. Siemens simatic ET 200MP 35 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens simatic ET 200MP : Manuel (40 pages), Manuel (24 pages), Manuel (29 pages), Manuel (47 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (30 pages), Manuel (25 pages), Manuel (42 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (39 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (29 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

Wiring

This section contains the block diagram of the module and outlines various wiring options.

You can find information on wiring the front connector, creating a cable shield, etc. in the

Wiring section of the S7-1500, ET 200MP system manual

(https://support.industry.siemens.com/cs/ww/en/view/59191792).

Note

Do not insert the potential jumpers included with the front connector!

Wiring and block diagram

The example in the following figure shows the terminal assignment and the assignment of

the channels. The individual channels are connected with a TRIAC (Triode for Alternating

Current).

① TRIAC 16x

② Backplane bus interface

Figure 3-1

CHx

RUN

ERROR

Block diagram and terminal assignment

Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)

Channel or channel status LED (green)

Status display LED (green)

Error display LED (red)

Equipment Manual, 12/2021, A5E34934069-AC