Siemens simatic ET 200MP Manuel - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens simatic ET 200MP. Siemens simatic ET 200MP 45 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens simatic ET 200MP : Manuel (40 pages), Manuel (24 pages), Manuel (29 pages), Manuel (47 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (30 pages), Manuel (25 pages), Manuel (42 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (39 pages), Manuel (28 pages), Manuel de l'équipement (35 pages), Manuel de l'équipement (32 pages), Manuel (29 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages)

Parameters/address space

4.3 Address space

Value status (Quality Information, QI)

The value status is always activated for the following modules:

● DQ 16x230VAC/2A ST QI

● DQ 16x230VAC/2A ST S QI

● DQ 16x230VAC/2A ST MSO

An additional bit is assigned to each channel for the value status. The bit for the value status

indicates if the output value specified by the user program is actually pending at the module

terminal (0 = value is incorrect).

Address space for configuration as 16-channel DQ 16x230VAC/2A ST QI

The following figure shows the assignment of the address space for the configuration as a

16-channel module with value status. You can freely assign the start address for the module.

The addresses of the channels are derived from the start address.

The letters "a to b" are printed onto the module. "For example, AB a" stands for module start

address output byte a.

Figure 4-1

Address space for configuration as 16-channel DQ 16x230VAC/2A ST QI with value

status

Digital output module DQ 16x230VAC/2A ST Relay (6ES7522-5HH00-0AB0)

Manual, 03/2015, A5E34934019-AA