Siemens SIMATIC ET 200S Manuel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 36 pages. Distributed i/o digital electronic module 4do dc24v/2a hf
Également pour Siemens SIMATIC ET 200S : Manuel de l'opérateur (18 pages), Manuel (16 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (26 pages), Manuel (37 pages), Manuel (24 pages), Manuel des fonctions (40 pages), Mode d'emploi (4 pages), Mode d'emploi original (19 pages), Mode d'emploi original (20 pages), Manuel (34 pages), Manuel (14 pages), Manuel (24 pages), Mode d'emploi original (17 pages), Mode d'emploi original (19 pages), Manuel (16 pages), Manuel (28 pages), Manuel (12 pages), Manuel (32 pages), Manuel (18 pages), Manuel (12 pages), Manuel (28 pages), Manuel (22 pages), Manuel (22 pages), Manuel (16 pages)

Properties

1.1 2AI RTD HF analog electronic module (6ES7134-4NB51-0AB0)

Use of Cu10 sensors

● Select "Three-wire thermal resistor" and "Cu10" at parameter assignment.

● Wire the Cu10 sensor in accordance with the three-wire connection method.

● Automatic, internal compensation of line resistance for the missing measuring line occurs

Note

Please note the following to ensure optimum line compensation in the case of Cu10:

• The sum of the cable resistance and measurement resistance must not exceed 31 Ω.

• The cable must have a resistance of no more than 8 Ω if you want to use the

during operation.

temperature range up to and above 312 °C.

Example: A 200 m Cu cable with a 0.5 mm

approximately 7 Ω. A smaller cross-section shortens the permissible cable length

accordingly.

conductor cross-section has

2AI RTD HF analog electronic module (6ES7134-4NB51-0AB0)

Manual, 05/2007, A5E01076876-02