Siemens SIMATIC ET 200SP Manuel - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 41 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (36 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (40 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Manuel (32 pages), Informations sur le produit (10 pages), Manuel de l'équipement (43 pages), Manuel (33 pages), Manuel de l'équipement (44 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (50 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

Imprimer la page
Siemens SIMATIC ET 200SP Manuel
Parameters/address space

4.3 Address space

4.3
Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image input.
Configuration options of DI 8x24VDC HF
You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure
the module by means of a GSD file, the configurations are available under various short
designations/module names; see the table below. The following configurations are possible:
Table 4- 2
Configuration options with GSD file
Configuration
1 x 8-channel without value status DI 8x24VDC HF V1.0
1 x 8-channel without value status DI 8x24VDC HF V1.1
1 x 8-channel with value status
1 x 8-channel without value status DI 8x24VDC HF V1.2
1 x 8-channel with value status
for module-internal Shared Input
with up to 4 submodules
1 x 8-channel with value status
1 x 8-channel without value status DI 8x24VDC HF V2.0
1 x 8-channel with value status
for module-internal Shared Input
with up to 4 submodules
1 x 8-channel with value status
2 x 4-channel without value status DI 8x24VDC HF V2.0, S.2
2 x 4-channel with value status
4 x 2-channel without value status DI 8x24VDC HF V2.0, S.4
4 x 2-channel with value status
Note
The following functions are only fully available when the submodule X.1 is configured and
the IO controller to which submodule X.1 is assigned has established a connection to the IO
device.
• Firmware update
• I&M identification data
• PROFIenergy
22
Short designation/module
name in the GSD file
DI 8x24VDC HF V1.1, QI
DI 8x24VDC HF V1.2, MSI
DI 8x24VDC HF V1.2, QI
DI 8x24VDC HF V2.0, MSI
DI 8x24VDC HF V2.0, QI
DI 8x24VDC HF V2.0, S.2
QI
DI 8x24VDC HF V2.0, S.4
QI
Configuration software, e.g. with STEP 7 (TIA Portal)
Integrated in the
GSD file
hardware catalog
PROFINET IO
STEP 7, as of
V13, SP1
X
X
X
X
X
X
---
---
---
---
---
---
---
Digital input module DI 8x24VDC HF (6ES7131-6BF00-0CA0)
GSD file
PROFIBUS DP
X
X
X
X
X
---
X
X
X
---
X
---
X
X
X
---
X
---
X
---
X
---
X
---
X
---
Manual, 12/2017, A5E03576305-AE