Siemens SIMATIC ET 200SP Manuel - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 32 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (36 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (41 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (40 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Informations sur le produit (10 pages), Manuel de l'équipement (43 pages), Manuel (33 pages), Manuel de l'équipement (44 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (50 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

Connecting

6.1 Connecting BaseUnit BU-Send

Procedure

To connect the BusAdapter BA-Send 1xFC , follow these steps:

1. Strip the sheath of the bus cable at the open end as follows:

Figure 6-3

Use the Stripping Tool for ET-Connection to do this. The relevant settings are shown on

the tool.

2. Pull back the locking slide of the BusAdapter BA-Send 1xFC and open the cover of the

connection element.

3. Lift the cable routing up as far as it will go.

4. Insert the unstripped single cores of the bus cable (according to the imprinted color coding)

into the cable routing as far as they will go and press the cable routing down as far as it will

go.

5. Close the cover of the connection element and push the locking slide forward.

Connecting cable

Mixed configuration

Equipment Manual, 11/2020, A5E33344611-AD