Siemens SIMATIC ET 200SP Manuel de l'équipement - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 43 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (36 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (41 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (40 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Manuel (32 pages), Informations sur le produit (10 pages), Manuel (33 pages), Manuel de l'équipement (44 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (50 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

Reference

You can find an overview of all new functions, improvements and revisions in the respective

firmware versions on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109478459).

2.2

Operating principle

The CPU contains the operating system and executes the user program. The user program is

located on the SIMATIC memory card and is processed in the work memory of the CPU.

The PROFINET interfaces on the CPU allow simultaneous communication with PROFINET

devices, PROFINET controllers, HMI devices, programming devices, other controllers and

other systems. The CPU 1510SP-1 PN supports operation as an IO controller, I-device or

standalone CPU.

With its optional PROFIBUS interface, CM DP, CPU 1510SP-1 PN supports the configuration of

PROFIBUS networks in addition to PROFINET IO. When you use the interface as a PROFIBUS DP

interface, you can configure the CPU 1510SP-1 PN as a DP master or as an intelligent DP slave

(I-slave).

IO controller

CPU 1510SP-1 PN sends and receives data from the connected IO devices within a

PROFINET IO system. You can operate the CPU with a maximum of 64 connected IO devices, a

maximum of 64 of which use IRT (Isochronous Real Time).

I-device

The "I-device" (intelligent IO device) functionality allows you to exchange data with an IO

controller. CPU 1510SP-1 PN thus fulfills the role of an intelligent distributed pre-processing

unit for sub-processes. The I-device is connected as an IO device to a higher-level IO

controller for this purpose.

Advantages:

• Interference-resistant configuration due to short signal and encoder wiring

• Reduced wiring requirements for transmission of the data via PROFINET

Standalone CPU

You can also use the CPU 1510SP-1 PN in the ET 200SP distributed I/O system as a "central

system" without a higher-level controller.

DP master

To use the ET 200SP as a DP master, you need the CPU and the optional communication

module, CM DP. When used as a DP master, ET 200SP exchanges data with the connected DP

slaves via PROFIBUS DP.

CPU 1510SP-1 PN (6ES7510-1DJ01-0AB0)

Equipment Manual, 05/2021, A5E03506268-AD

Product overview

2.2 Operating principle