Siemens SIMATIC ET 200SP Manuel de l'équipement - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 32 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (36 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (41 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (40 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Manuel (32 pages), Informations sur le produit (10 pages), Manuel de l'équipement (43 pages), Manuel (33 pages), Manuel de l'équipement (44 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel (50 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the

configuration, additional/different addresses are assigned in the process image output/input.

Configuration options of RQ 4×120VDC-230VAC/5A NO MA ST

You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure the

module by means of a GSD file, the configurations are available under various short

designations/module names; see the table below. The following configurations are possible:

Table 4- 2

Configuration options with GSD file

Configuration

1 x 4-channel without value sta-

tus

1 x 4-channel with value status

Evaluating the value status

An additional byte is allocated in the input address space if you enable the value status for

the digital module. Bits 0 to 3 in this byte are assigned to a channel. They provide information

about the validity of the digital value.

Bit = 1: No fault is present on the channel.

Bit = 0: Channel is deactivated or there is a fault on the module.

If a fault occurs on a channel with this module, the value status for all channels is 0.

Digital output module RQ 4x120VDC-230VAC/5A NO MA ST (6ES7132-6MD00-0BB1)

Equipment Manual, , A5E36107692-AB

Short designation/module

name in the GSD file

RQ 4×120VDC-230VAC/5A NO

MA ST

RQ 4×120VDC-230VAC/5A NO

MA ST, QI

Configuration software, e.g. with STEP 7 (TIA Por-

tal)

Integrated in the

GSD file

hardware catalog

PROFINET IO

STEP 7, as of V13,

SP1

Parameters/address space

4.3 Address space

GSD file

PROFIBUS DP