Siemens SIMATIC ET 200SP Manuel - Page 45

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 50 pages. Distributed i/o system
Également pour Siemens SIMATIC ET 200SP : Manuel (40 pages), Manuel de l'utilisateur (21 pages), Manuel (34 pages), Manuel (48 pages), Manuel (30 pages), Manuel (34 pages), Informations sur le produit (38 pages), Manuel (37 pages), Manuel (36 pages), Manuel (44 pages), Manuel (31 pages), Manuel (35 pages), Manuel (23 pages), Manuel de configuration (20 pages), Manuel (34 pages), Manuel (29 pages), Manuel (33 pages), Manuel (31 pages), Manuel de l'utilisateur (32 pages), Manuel (31 pages), Manuel (28 pages), Manuel (41 pages), Manuel (32 pages), Manuel (49 pages), Manuel (24 pages), Manuel (34 pages), Manuel (41 pages), Manuel (30 pages), Manuel (31 pages), Manuel (27 pages), Manuel (24 pages), Manuel (24 pages), Manuel (25 pages), Manuel (49 pages), Manuel (40 pages), Manuel (38 pages), Manuel (39 pages), Informations sur le produit (24 pages), Manuel (32 pages), Informations sur le produit (10 pages), Manuel de l'équipement (43 pages), Manuel (33 pages), Manuel de l'équipement (44 pages), Mode d'emploi original (6 pages), Manuel (35 pages), Manuel (28 pages), Manuel de l'équipement (32 pages), Manuel (30 pages), Manuel (26 pages), Manuel (28 pages), Manuel (34 pages), Manuel (44 pages), Manuel (33 pages), Manuel de l'équipement (42 pages), Manuel d'instructions original (16 pages)

Siemens SIMATIC ET 200SP Manuel
Compatibility
6.1
Compatibility of modules
Station configuration with more than 32 I/O modules
Certain I/O modules with functional status 001 and 002 do not support a station
configuration with more than 32 I/O modules.
The following table shows all modules that do not support a station configuration with more
than 32 I/O modules.
Table 6- 1
Modules
Analog modules
AI 4xI 2-/4-wire ST
AI 4xU/I 2-wire ST
AI 4xRTD/TC 2-/3-/4-wire HF
AI 4xU/I ST
Digital modules
DI 16x24VDC ST
DI 8x24VDC ST
DQ 16x24VDC/0.5A ST
DQ 4x24VDC/2A ST
DQ 8x24VDC/0.5A ST
Bumpless changeover of modules
You can find additional information on the bumpless changeover of modules in the Product
Information on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/73021864).
Operation of modules in isochronous mode
Since the ET 200SP R1 system does not support isochronous mode, there is a corresponding
functional limitation with modules (e.g. TM Timer DIDQ 10x24) that require isochronous
mode for full functionality.
Data record repetition on redundancy switchovers
During a redundancy switchover, it may happen that a data record addressed to the module
does not reach the recipient or the data record response cannot be delivered. In these cases,
there is an automatic repetition of data records.
Interface Module IM 155-6 PN R1 (6ES7155-6AU00-0HM0)
Equipment Manual, 11/2022, A5E51160307-AA
Incompatible modules with functional status
Article number
6ES7134-6GD00-0BA1
6ES7134-6HD00-0BA1
6ES7134-6JD00-0CA1
6ES7135-6HD00-0BA1
6ES7131-6BH00-0BA0
6ES7131-6BF00-0BA0
6ES7132-6BH00-0BA0
6ES7132-6BD20-0BA0
6ES7132-6BF00-0BA0
6
Up to and including
functional status
002
002
002
002
002
002
002
002
002
45