Siemens SIMATIC ET 200SP HA Manuel - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 32 pages. Distributed i/o devices busadapter for distributed i/o
Également pour Siemens SIMATIC ET 200SP HA : Manuel (50 pages), Manuel (34 pages), Manuel (38 pages), Manuel de l'équipement (44 pages), Manuel de l'équipement (50 pages), Manuel de l'équipement (38 pages), Manuel de l'équipement (46 pages), Manuel de l'équipement (42 pages), Manuel de l'équipement (44 pages), Manuel de l'équipement (36 pages), Manuel de l'équipement (38 pages)

Imprimer la page

Displays and interrupts

6.1 Status and error displays

RN LED

Table 6-1

Status and error displays of the RN LED

RN LED

No supply voltage or insufficient supply voltage at the

interface module.

Off

Interface module is deactivated.

Flashes

Interface module is not configured.

ET 200SP HA starts up.

ET 200SP HA parameters are assigned

ET 200SP HA is exchanging data with the IO Control‐

ler.

ER LED

Table 6-2

Error displays of the ER LED

ER LED

Group fault and group fault for channels

Flashes

Configured settings do not match the actual configu‐

ration of the ET 200SP HA.

Impermissible configuration states

Parameter assignment error in the I/O module

Note

Configuration errors are only checked when the station starts up and not during a CiR or H-

CiR process.

Meaning

Remedy

Check the supply voltage or switch it on at the inter‐

face module.

Check the backplane bus for short-circuit

Activate the interface module with the configuration

software or the user program.

Configure the interface module with the configuration

software.

---

Remedy

Evaluate the diagnostics and eliminate the error.

Check the configuration of the ET 200SP HA for miss‐

ing modules, defective modules or the presence of

non-configured modules.

You can find information about the hardware configu‐

ration of the ET 200SP HA in the system manual

ET 200SP HA Distributed I/O System ; System Plan‐

ning, Hardware Configuration.

Evaluate the display of the module information in HW-

Konfig and eliminate the error in the corresponding I/

O module.

Interface Module IM 155-6 PN HA (6DL1155-6AU00-0PM0)

Manual, 05/2017, A5E39262148-AA