Siemens SIMATIC ET 200SP HA Manuel de l'équipement - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 50 pages. Distributed i/o devices busadapter for distributed i/o
Également pour Siemens SIMATIC ET 200SP HA : Manuel (32 pages), Manuel (50 pages), Manuel (34 pages), Manuel (38 pages), Manuel de l'équipement (44 pages), Manuel de l'équipement (38 pages), Manuel de l'équipement (46 pages), Manuel de l'équipement (42 pages), Manuel de l'équipement (44 pages), Manuel de l'équipement (36 pages), Manuel de l'équipement (38 pages)

6.3

Parameter reassignment

Definition

Each configuration change resets the corresponding reaction. Changing the configuration of a

function does not affect other functions.

6.4

6.4.1

Definition

Enabling of the diagnostics for missing or insufficient supply voltage L+.

6.4.2

Definition

You can configure two identical modules redundantly. To do so, plug both modules into a

redundant terminal block side by side. You can find additional information on mounting

modules in an IO redundancy configuration in the ET 200SP HA System Manual, section

"Installing", "Installing terminal block".

In IO redundancy mode, the left module is the master and the right module is the slave. The

HART communication takes place exclusively via one of the two redundant channels.

Description

Both redundant modules measure simultaneously and independently in the process. Both

redundant modules form diagnostics, interrupts and process values.

6.4.3

Definition

This diagnostic message is enabled when a short-circuit occurs between the connection cables

of the encoder.

DI 16xNAMUR HA

Equipment Manual, 08/2019, A5E39293880-AD

6.4 Explanation of the module/channel parameters

Parameters