Siemens SIMATIC ET 200SP HA Manuel de l'équipement - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 36 pages. Distributed i/o devices busadapter for distributed i/o
Également pour Siemens SIMATIC ET 200SP HA : Manuel (32 pages), Manuel (50 pages), Manuel (34 pages), Manuel (38 pages), Manuel de l'équipement (44 pages), Manuel de l'équipement (50 pages), Manuel de l'équipement (38 pages), Manuel de l'équipement (46 pages), Manuel de l'équipement (42 pages), Manuel de l'équipement (44 pages), Manuel de l'équipement (38 pages)

Imprimer la page
Siemens SIMATIC ET 200SP HA Manuel de l'équipement
Displays and interrupts

7.2 LEDs

7.2
LEDs
7.2.1

DIAG LED

Definition
The DIAG LED provides you diagnostic information.
Description
The diagnostic display of the DIAG LED is as follows:
7.2.2

MT LED

Definition
The MT LED provides you with information about maintenance.
Description
The MT LED indicates the following statuses:
24
DIAG LED
Meaning
The power supply of the ET 200SP HA is disrupted or switched off.
Off
Module is not configured.
flashes
Module parameters are assigned. No diagnostic message is pending.
On
Module parameters are assigned. At least one diagnostic message is pending.
flashes
MT LED
Meaning
No maintenance is required.
Off
Maintenance is required. At least one maintenance event has occurred.
On
Note: After activating the output disable switch, only the associated diagnostic alarm
is pending.
DQ 32x24VDC/0.5A HA
Equipment Manual, 08/2019, A5E48262762-AB