Siemens SIMATIC NET Manuel d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Siemens SIMATIC NET. Siemens SIMATIC NET 40 pages. Network components bus terminal
Également pour Siemens SIMATIC NET : Manuel d'utilisation (29 pages), Manuel d'utilisation (50 pages), Manuel d'utilisation (28 pages), Manuel d'instructions de montage (6 pages), Informations sur le produit (6 pages), Manuel d'installation (50 pages), Manuel d'installation (40 pages), Manuel de référence (14 pages), Manuel d'installation (34 pages), Manuel d'installation (48 pages), Manuel d'utilisation (32 pages)

Installing the Device

2.1.1 Mounting the Device on a DIN Rail

Note

For detailed dimensions of the device with either rack, DIN rail or panel hardware

installed, refer to

2.1.1

Mounting the Device on a DIN Rail

The RUGGEDCOM RS8000T can be ordered with a panel/DIN rail adapter preinstalled

on the back of the chassis. Use the adapter to mount the device to a standard 35 mm

(1.4 in)IEC/EN 60715 or TS35 DIN rail.

Mounting the Device

To mount the device to a DIN rail, do the following:

"Dimension Drawings (Page

Hook the top teeth of the adapter onto the DIN rail.

Note

The adapter features a sliding release with a slot at the bottom for a flathead

screwdriver.

DIN Rail

Panel/DIN Rail Adaptor

Figure 2.1

Mounting the Device to a DIN Rail

Insert a flathead screwdriver into the slot of the sliding release and move it

down.

Push the device against the bottom of the DIN rail, then let go of the sliding

release to latch the device.

22)".

RUGGEDCOM RS8000T

Installation Manual, 01/2021, C79000-G8976-1023-05