Siemens SIMATIC NET Manuel d'installation - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Siemens SIMATIC NET. Siemens SIMATIC NET 50 pages. Network components bus terminal
Également pour Siemens SIMATIC NET : Manuel d'utilisation (29 pages), Manuel d'utilisation (50 pages), Manuel d'utilisation (28 pages), Manuel d'instructions de montage (6 pages), Informations sur le produit (6 pages), Manuel d'installation (40 pages), Manuel d'installation (40 pages), Manuel de référence (14 pages), Manuel d'installation (34 pages), Manuel d'installation (48 pages), Manuel d'utilisation (32 pages)

Device Management

This section describes how to connect to and manage the device.

3.1

The following describes the various methods for accessing the RUGGEDCOM RS900F

console and Web interfaces on the device. For more detailed instructions, refer to the

RUGGEDCOM ROS Configuration Manual for the RUGGEDCOM RS900F.

Note

Ethernet cables should be only be connected/disconnected in a non-hazardous area,

or when the device is not energized.

Console Port

Connect a workstation directly to the RS232 serial console port to access the boot-

time control and RUGGEDCOM ROS console interface. The console port provides

access to RUGGEDCOM RS900F's console interface.

Note

The serial console port is intended to be used only as a temporary connection during

initial configuration or troubleshooting, and should only be used in a safe area (as

defined by IEC 60079-0, Edition 6.0).

Use the following settings to connect to the port:

Speed

Data Bits

Stop Bit

Parity

Flow Control

Terminal ID

RUGGEDCOM RS900F

Installation Manual, 04/2021, C79000-G8976-1350-07

57600 baud

None

Off

VT100