Siemens SIMATIC NET RUGGEDCOM i801 Manuel d'installation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Siemens SIMATIC NET RUGGEDCOM i801. Siemens SIMATIC NET RUGGEDCOM i801 38 pages. Rugged ethernet switches
Également pour Siemens SIMATIC NET RUGGEDCOM i801 : Manuel d'installation (36 pages)
Imprimer la page
9
10
Figure 1.1
Failsafe Alarm Relay
Power Supply Terminal Block
POWER LEDs
ALARM LED
Port Status LED
Communication Ports
Access Plate
RS-232 Console Port
1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM i801:
AC or DC power cord (16 AWG)
CAT-5 Ethernet cables
Flathead screwdriver
RUGGEDCOM i801
Installation Manual, 01/2021, C79000-G8976-1003-06
Access Plate
RS-232 Console Port (RJ-45)
RUGGEDCOM i801
Tools/Materials
Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (If Equipped) (Page
8)"
•
"Failsafe Alarm Relay Specifications (Page 19)"
A pluggable terminal block. For more information, refer to:
•
"Connecting Power (Page 9)"
•
"Power Supply Specifications (Page 19)"
Illuminate when power is being supplied to the device by the
respective power source.
Color
Green
Red
Off
Illuminates when an alarm condition exists.
Indicates the status of the associated port.
State
Solid
Blinking
Off
Receive and transmit data, as well as provide access to the
RUGGEDCOM i801 Web interface. For more information about
the various ports available for the RUGGEDCOM i801, refer to
"Communication Ports (Page
The removable access plate provides access to the microSD/
microSDHC slot. Use a microSD/microSDHC card to load/store the
firmware and configuration for the device. For information about
using a microSD/microSDHC card, refer to
MicroSD/MicroSDHC Card (Page
The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page
For connecting power to the device.
For connecting the device to the network.
For mounting the device to a DIN rail.
Introduction
1.3 Required Tools and Materials
Description
Device ready
Device booting up
No power
Description
Link
Activity
No link/activity
15)".
"Inserting/Removing the
12)".
11)".
Purpose
3