Siemens SIMATIC PCS 7 Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 36 pages. Process control system, basis library readme v9.0 sp1 online
Également pour Siemens SIMATIC PCS 7 : Manuel d'introduction (6 pages), Manuel du système (28 pages), Manuel des fonctions (42 pages), Lisez-moi (26 pages), Manuel (39 pages)
Imprimer la page
1.1
Interfaces to inputs and outputs
The AddFEM SoE has the following inputs and outputs:
● 31 digital inputs (DI) of the AddFEM SoE with time stamp
The digital inputs are:
– 15 digital input channels 1 to 3 and 5 to 16 at the interface X6 as well as
– 16 channels at the interface X7
Usage as a digital input or output can be specified for each channel individually.
● The supplementary 8 analog inputs and 12 analog outputs can be used as with
AddFEM (Front End Module).
The technical specifications for the inputs and outputs are described in the
"AddFEM (Front End Module)" operating instructions in the "Technical specifications"
section. The document is available under the following link:
Internet (http://www.siemens.com/automation/service&support)
1.2
Accessories
Designation
SoE repeater module
SoE repeater extension module
Connector set
Fiber-optic cable for
GPS Time Server – SoE repeater module
Plastic fiber-optic cable for
SoE repeater module – AddFEM SoE
Plastic fiber-optic cable for
SoE repeater extension module – AddFEM SoE
If you require standard accessories, further information is provided in the
"AddFEM (Front End Module)" operating instructions.
AddFEM Sequence of Event
Operating Instructions, 03/2016, A5E00075541X-06
These can be used as digital inputs 17 to 32 or alternatively/additionally as digital
outputs 1 to 16.
1.1 Interfaces to inputs and outputs
Length Article number
– 6DL9200-8AA
– 6DL9201-8AA
– 6DL9900-8AA
15 m
6DL9902-8AA
25 m
6DL9902-8AB
1.5 m
6DL9903-8AA
2.5 m
6DL9903-8AB
1.5 m
6DL9903-8AA
2.5 m
6DL9903-8AB
Overview
9