Siemens SIMATIC RF680R Pour commencer - Page 5
Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Siemens SIMATIC RF680R. Siemens SIMATIC RF680R 27 pages.
Également pour Siemens SIMATIC RF680R : Pour commencer (2 pages)
Imprimer la page
Starting Web Based Management (WBM)
Follow the steps below to start the WBM:
1.
Start your Web browser.
You can use the following Web browsers: Microsoft Edge, Mozilla Firefox and Google Chrome.
2.
Enter the IP address of the reader preceded by "https://" in the address field of your web browser.
3.
Confirm your entry by pressing the <Enter> key.
NOTE
Updating the HTTPS certificate
The first time you log on, the reader's HTTPS certificate is displayed as not secure. Note that the
certificate stored in the reader is only intended to ensure that the first connection to the reader is
encrypted. Confirm the security of the certificate. Then, transfer your own secure certificate to the
reader.
Result: The WBM of the reader opens.
Configuring the read point
Follow the steps below to configure the read point:
1.
In the "Settings - Read points" menu item, configure the antenna and the antenna cable. To do this, select
the connected antenna in the "Gain" drop-down list and the type designation of the cable in the "Cable
loss" drop-down list or enter the values of the components in the relevant input boxes.
2.
Click the
Adjusting the antenna
Follow the steps below to optimize the antenna adjustment:
1.
Position the object fitted with a transponder and to be identified at the required read point.
2.
Align the reader or the antenna so that its front points in the direction of the object (transponder) to be
identified.
Keep to the minimum distances between antennas and transponders to avoid antenna errors.
When using linear antennas, make sure the polarization direction is correct.
symbol to transfer the configuration to the reader.
5