Siemens SIMATIC RTLS4084T Manuel d'utilisation - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SIMATIC RTLS4084T. Siemens SIMATIC RTLS4084T 35 pages. Localization systems
Également pour Siemens SIMATIC RTLS4084T : Manuel d'utilisation (23 pages)
Imprimer la page
"Button Pressed" event message
This event message is sent after the F1 function key has been pressed or released. If you want
to adapt the short/long press functionality, you need to change the parameter involved in the
configuration file, "RTLS_LM_DataExport.ini".
URI
Parameter
The following happens when you briefly press the F1 function key:
Value
0
1
The default value is 1 in the configuration file "RTLS_LM_DataExport.ini".
SIMATIC RTLS4084T
Operating Instructions, 04/2021, C79000-G8976-C626-02
"agilion.wls.epaper.button_pressed"
Consists of:
TransponderID, type: UInt64
ButtonID, type: UInt32
ButtonDown, type: UInt32
Description
Evaluated as not pressed
OnShortButtonPress = 0
•
Function key briefly pressed > Event parameter: ButtonDown = 0
•
Function key pressed long (> 2 seconds) > Event parameter: But-
tonDown = 1
•
After a short or long press and subsequent heartbeat > Event parame-
ter: ButtonDown = 0
Considered pressed
OnShortButtonPress = 1
•
Function key pressed short or long > Event parameter: ButtonDown = 1
•
After a short or long press and subsequent heartbeat > Event parame-
ter: ButtonDown = 0
Programming interface
3.4 Event messages
19