Siemens Simatic S7-1500 Manuel de configuration - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Siemens Simatic S7-1500. Siemens Simatic S7-1500 20 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens Simatic S7-1500 : Manuel (40 pages), Manuel (37 pages), Manuel (47 pages), Manuel (24 pages), Manuel (34 pages), Manuel de l'utilisateur (45 pages), Manuel (27 pages), Manuel (47 pages), Manuel (43 pages), Manuel (48 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (50 pages), Manuel (30 pages), Manuel (41 pages), Manuel (50 pages), Manuel (40 pages), Programmation de la sécurité Manualline (48 pages), Manuel d'instructions pour la communication (36 pages), Manuel (40 pages), Manuel (25 pages), Manuel (42 pages), Description de l'application (50 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (41 pages), Manuel (46 pages), Manuel (38 pages), Manuel (35 pages), Manuel (39 pages), Manuel (28 pages), Manuel (35 pages), Manuel de l'équipement (35 pages), Manuel (50 pages), Manuel de l'équipement (32 pages), Manuel de l'équipement (38 pages), Manuel (29 pages), Manuel de l'équipement (38 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

3 Configuration

3.2.2

Configuration of project 2

Preparation

Open another instance of the TIA Portal configuration software and create a new

project.

Implementing the devices

Via the project navigation, insert a S7-1500 CPU (here CPU 1511-1 PN). It gets the

name "PLC_2".

Again, in the "Devices & networks" overview, add a PROFINET interface module

(here IM 155-6 PN ST). In terms of structure and configuration (IP address and

device name), this peripheral station is identical to that in

can copy the already configured ET 200SP from project 1. Thus, you can avoid the

configuration of the peripheral station.

Linking the devices

To set up an automation system, the individual hardware components must be

configured, parameterized and connected to each other. Use the device and

network view to do this.

Proceed as follows:

1. Select CPU 1511-1 PN in the project tree and open its folder.

2. Open the device view of the CPU by double clicking "Device configuration".

3. In the graphical view, select the CPU interface to be networked. The properties

of the selected interface are displayed in the inspector window.

SharedDeviceKonfig

Entry ID: 109741600,

V1.0,

11/2016

Chapter

3.2.1. Also, you