Siemens Simatic S7-1500 Manuel - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens Simatic S7-1500. Siemens Simatic S7-1500 46 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens Simatic S7-1500 : Manuel (40 pages), Manuel (37 pages), Manuel (47 pages), Manuel (24 pages), Manuel (34 pages), Manuel de l'utilisateur (45 pages), Manuel (27 pages), Manuel de configuration (20 pages), Manuel (47 pages), Manuel (43 pages), Manuel (48 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (50 pages), Manuel (30 pages), Manuel (41 pages), Manuel (50 pages), Manuel (40 pages), Programmation de la sécurité Manualline (48 pages), Manuel d'instructions pour la communication (36 pages), Manuel (40 pages), Manuel (25 pages), Manuel (42 pages), Description de l'application (50 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (41 pages), Manuel (38 pages), Manuel (35 pages), Manuel (39 pages), Manuel (28 pages), Manuel (35 pages), Manuel de l'équipement (35 pages), Manuel (50 pages), Manuel de l'équipement (32 pages), Manuel de l'équipement (38 pages), Manuel (29 pages), Manuel de l'équipement (38 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

4 Configuration/Engineering

Step

Assign the interface you want to use to

the actual parameter of the block call

NOTE

It is recommended to use the TIA Portal maintained global constants for the

interface identifier. Otherwise the function block may not work properly.

However, any Open User Communication (OUC) capable interface may be used,

including Industrial Ethernet CM or CP extension cards.

At this point the LCCF_EnetScanner function block is not operable. The

configuration of the EtherNet/IP field devices needs to be done and an area to for

the sensor and control data needs to be declared.

4.2

Creating the EtherNet/IP IO system

Similar to PROFINET or PROFIBUS there is a managing device in an EtherNet/IP

network. In this application example it is realized by the S7-1500. The managing

system is called the Scanner.

For the Scanner to know, which managed devices, called Adapters, are in the

scope, it requires some information. These information are describing the

parameters of the data exchange. They contain as minimum:

•

Addressing information of the Adapter

•

Update rates for both Inputs and Outputs

•

Amount of data to be exchanged

As for EtherNet/IP there is no graphical way to configure the EtherNet/IP IO system

in TIA Portal the LCCF_EnetScanner function block accepts the configuration in

the form of an array of Adapter descriptions. The descriptions are best stored in a

global DB. In this application example the DB is called "EnetIoSystem", which

stores the array with the adapter descriptions in it.

EtherNet/IP Scanner

Entry-ID: 109782314,

V1.1.0,

Instruction

04/2021

Result