Siemens Simatic S7-1500 Manuel de l'équipement - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'équipement pour {nom_de_la_catégorie} Siemens Simatic S7-1500. Siemens Simatic S7-1500 35 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Également pour Siemens Simatic S7-1500 : Manuel (40 pages), Manuel (37 pages), Manuel (47 pages), Manuel (24 pages), Manuel (34 pages), Manuel de l'utilisateur (45 pages), Manuel (27 pages), Manuel de configuration (20 pages), Manuel (47 pages), Manuel (43 pages), Manuel (48 pages), Manuel (26 pages), Manuel (28 pages), Manuel (50 pages), Manuel (34 pages), Manuel de l'utilisateur (44 pages), Manuel (50 pages), Manuel (30 pages), Manuel (41 pages), Manuel (50 pages), Manuel (40 pages), Programmation de la sécurité Manualline (48 pages), Manuel d'instructions pour la communication (36 pages), Manuel (40 pages), Manuel (25 pages), Manuel (42 pages), Description de l'application (50 pages), Manuel (28 pages), Manuel (33 pages), Manuel (49 pages), Manuel (36 pages), Manuel (41 pages), Manuel (46 pages), Manuel (38 pages), Manuel (35 pages), Manuel (39 pages), Manuel (28 pages), Manuel (35 pages), Manuel (50 pages), Manuel de l'équipement (32 pages), Manuel de l'équipement (38 pages), Manuel (29 pages), Manuel de l'équipement (38 pages), Manuel (34 pages), Manuel (36 pages), Manuel de l'équipement (50 pages), Manuel (45 pages)

Parameters/address space

4.2 Declaration of parameters

4.2

Declaration of parameters

Switching cycle counter maintenance

You use this parameter to enable the maintenance alarm "Limit value warning" when the

switching cycle counter limit is violated.

You configure the limit with the parameter "Switching cycle limit" for each channel CHx.

Reaction to CPU STOP

Determines the reaction of the output to the CPU going into STOP state or when the

connection to the CPU is interrupted.

Switching cycle counter

Channel-by-channel enable of switching cycle counter (Page 10).

Switching cycle counter limit

Defines the limit channel-by-channel. If this value is exceeded, the "Limit value warning"

maintenance interrupt is signaled.

Enter an integer value between 0 and 16777214. Refer to the data sheet of the connected

actuator. Recommendation: Instead of entering the maximum value, set the value, e.g., to

80% or 90% of the maximum value. You then have enough time to preventatively change the

actuator.

Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)

Equipment Manual, 12/2021, A5E34934069-AC