Cisco WS-C3850-24T-E Aperçu du produit - Page 20

Parcourez en ligne ou téléchargez le pdf Aperçu du produit pour {nom_de_la_catégorie} Cisco WS-C3850-24T-E. Cisco WS-C3850-24T-E 33 pages. Catalyst 3850 series

Imprimer la page
Cisco WS-C3850-24T-E Aperçu du produit
LEDs
S-PWR LED
Table 8: S-PWR LED
Color
Off
Green
Blinking green
Amber
Blinking amber
ACTV LED
Table 9: ACTV LED
Color
Off
Green
Slow blinking green
Amber

STACK LED

The STACK LED shows the sequence of member switches in a stack. Up to eight switches can be members
of a stack. The first eight port LEDs show the member number of a switch in a stack.
This figure shows the LEDs on the first switch, which is stack member number 1. For example, if you press
the Mode button and select Stack, the LED for port 1 blinks green. The LEDs for ports 2 and 3 are solid green,
Catalyst 3850 Switch Hardware Installation Guide
20
Description
StackPower cable is not connected, or the switch is in standalone mode.
Each StackPower port is connected to another switch.
This appears on the switch in a StackPower ring configuration that detects an open
ring or has only one StackPower cable connected.
There is a fault: load shedding is occurring, a StackPower cable is defective, or
an administrative action is required. See the switch software configuration guide
for information about configuring StackPower.
The StackPower budget is not sufficient to meet current power demands.
Description
Switch is not the active switch.
Switch is the active switch or a standalone switch.
Switch is in stack standby mode.
An error occurred when the switch was selecting the active switch, or another type
of stack error occurred.
Product Overview
OL-26779-05