Siemens Simatic S7-300 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens Simatic S7-300. Siemens Simatic S7-300 18 pages. Automation systems, controlling a physical axis
Également pour Siemens Simatic S7-300 : Manuel de l'utilisateur (34 pages), Manuel (21 pages), Mode d'emploi (4 pages), Mode d'emploi (5 pages), Manuel (35 pages), Pour commencer (8 pages), Pour commencer (16 pages), Description de l'application (24 pages), Manuel (32 pages), Manuel d'installation et de matériel (20 pages), Pour commencer (32 pages)

Introduction

This manual describes how to connect the Display and the External Device (target PLC).

In this manual, the connection procedure is described in the sections identified below:

System Configuration

This section lists the types of External

Devices and SIO that you can connect.

External Device Selection

Select the model (series) of the External

Device and its connection method.

Communication Settings

This section shows setting examples for

communicating between the Display and

the External Device.

Setup Items

This section describes communication

setup items on the Display.

Set the Display's communication settings

in GP Pro-EX or in off-line mode.

Operation

GP-Pro EX Device/PLC Connection Manual

Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver



"1 System Configuration" (page 3)



"2 External Device Selection" (page 6)



"3 Communication Settings" (page 7)



"4 Setup Items" (page 9)