Siemens SIMATIC TP1200 Comfort INOX PCT Mode d'emploi Compact - Page 23
Parcourez en ligne ou téléchargez le pdf Mode d'emploi Compact pour {nom_de_la_catégorie} Siemens SIMATIC TP1200 Comfort INOX PCT. Siemens SIMATIC TP1200 Comfort INOX PCT 48 pages. Hmi devices; comfort panels
Également pour Siemens SIMATIC TP1200 Comfort INOX PCT : Mode d'emploi Compact (42 pages)
Imprimer la page
3.2
Inserting the mounting seal
The following figures in this section are examples.
To prevent the mounting seal from being inserted in the wrong direction, it has an
asymmetric coding tap. On all mounting gaskets of the INOX devices, the coding tap is on
the bottom left in relation to the rear of the device.
Note
Use a new mounting seal for each installation, because the promised degree of protection
cannot be guaranteed otherwise.
Procedure
1. Look for the coding tap on the mounting seal. Turn the mounting seal so that the coding
tap is on the bottom left as seen in the figure below:
①
②
③
2. Carefully place the device on the front of the device (interfaces point to you).
Comfort Panels INOX PCT
Compact Operating Instructions, 05/2018, A5E38804191-AA
Coding tap
Positioning hooks
Seal corner
Mounting the device
3.2 Inserting the mounting seal
23