Siemens SINAMICS G120 Manuel d'application - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel d'application pour {nom_de_la_catégorie} Siemens SINAMICS G120. Siemens SINAMICS G120 34 pages. Using blocksize converters in marine applications
Également pour Siemens SINAMICS G120 : Pour commencer (46 pages), Manuel d'utilisation (32 pages), Pour commencer (30 pages), Instructions pour l'installation du matériel (2 pages), Instructions d'installation et manuel du propriétaire (2 pages), Instructions d'installation (2 pages), Instructions d'installation (2 pages), Mode d'emploi Compact (32 pages), Manuel (42 pages), Pour commencer (50 pages), Manuel de l'appareil (34 pages), Manuel d'installation rapide (2 pages), Description de l'application (50 pages), Mode d'emploi Compact (2 pages), Manuel (31 pages), Mode d'emploi Compact (2 pages), Mode d'emploi Compact (2 pages)

8.2

Integration of the components in the cabinet

Because of possible vibration stress, a Control Unit should not be directly plugged onto a

PM240-2 Power Module but should be installed separately in a control cabinet.

An exception to this recommendation are the CU230P-2 and the CU240-2 when used in

combination with Power Modules of frame size FSA, FSB, or FSC.

See "System configuration for marine applications (Page 21)").

CU230P-2, CU240E-2, CU250S-2 Control Units are installed offset off the Power Module

using the "Control Unit Adapter Kit" CUA20.

The "Control Unit Adapter Kit" CUA20 comprises an adapter, which is plugged onto the

Power Module, and a base that is mounted next to the Power Module in the cabinet. The

Control Unit is then plugged onto this base.

When installing an S120 converter (in the Blocksize format), a Control Unit Adapter CUA31

or CUA32 is directly plugged onto a PM240-2 Power Module. A higher-level control module

(e.g. CU320-2) is connected using "DRIVE-CLiQ".

Figure 8-2

Control cabinet with integrated Power Module, frame size FSG, and an integrated, separately installed Control

Unit

Using SINAMICS G120 / G120C / S120 Blocksize converters in marine applications

Application Manual, 11/2019, A5E48346362A

Marine-specific installation regulations

8.2 Integration of the components in the cabinet