Siemens SINAMICS G120P Manuel d'utilisation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SINAMICS G120P. Siemens SINAMICS G120P 28 pages. Line reactors for power modules pm330
Également pour Siemens SINAMICS G120P : Manuel d'utilisation (26 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (22 pages), Manuel (18 pages), Manuel d'utilisation (18 pages)

Electrical installation

Risk of fire due to ground fault/short-circuit

Inadequate installation of the cables to the Power Module DC link can result in a ground

fault/short-circuit and place persons at risk as a result of the associated smoke and fire.

• Use the local installation regulations to avoid this fault.

• Protect the cables against mechanical damage.

• Also implement one of the following measures:

Note

Cable lengths

Keep the connecting cables to the Power Module as short as possible (max. 5 m).

Tightening torques for screw connections

The following tightening torques apply when tightening connections of operating current-

conducting parts (busbars), non-operating current-conducting parts (ground connections,

ground terminal connections), and general steel threaded connections.

Table 4- 2

WARNING

– Use cables with double insulation.

– Maintain adequate clearance, e.g. by using spacers.

– Lay the cables in separate cable ducts or conduits.

Tightening torques for screw connections

Thread

M10

M12

Ground connections, protective

conductor connections, steel

threaded connections

(fault current-conducting)

10 Nm

25 Nm

50 Nm

88 Nm

Plastic, busbars (operating current-

conducting)

13 Nm

25 Nm

50 Nm

dV/dt filter plus Voltage Peak Limiter

Operating Instructions, 04/2014, A5E32847105B AB

6 Nm