Siemens SINAMICS G120P Manuel d'utilisation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SINAMICS G120P. Siemens SINAMICS G120P 26 pages. Line reactors for power modules pm330
Également pour Siemens SINAMICS G120P : Manuel d'utilisation (28 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (22 pages), Manuel (18 pages), Manuel d'utilisation (18 pages)

Electrical installation

Interface overview

Figure 4-1

Connection

When connecting the du/dt filter compact plus Voltage Peak Limiter, you must take into

account the following conditions to ensure that it functions correctly:

● Control cables must be routed separately from power cables. Power cables are the motor

cable or the connecting cables from the DC link of the Power Module (terminals

DCP/DCN) to the du/dt filter compact plus Voltage Peak Limiter. In particular, you must

ensure that control cables and power cables are not routed in parallel in a joint cable

raceway, even if all the cables are shielded.

● You must use shielded motor cables. The shield for the motor cable must be attached to

the shield plate in the cabinet and motor housing.

● The ground wire for the motor must be fed directly back to the Power Module.

Interface overview of du/dt filter compact plus Voltage Peak Limiter, order number

6SL3000-2DE35-0EA0

dV/dt filter compact plus Voltage Peak Limiter

Operating Instructions, 11/2013, A5E32847614B AA