Siemens SINAMICS G120P Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SINAMICS G120P. Siemens SINAMICS G120P 26 pages. Line reactors for power modules pm330
Également pour Siemens SINAMICS G120P : Manuel d'utilisation (28 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (22 pages), Manuel (18 pages), Manuel d'utilisation (18 pages)

Connection overview

Figure 4-2

Cable cross-sections

Table 4- 1

Cable cross-sections for connections between the du/dt filter plus Voltage Peak Limiter and Power Module

du/dt filter plus Voltage Peak

Limiter

6SL3000-2DE35-0AA0

Risk of fire and damage to equipment due to short-circuit/ground fault

The cables to the DC link of the Power Modules must be routed so that a ground fault or

short circuit can be ruled out. A ground fault can result in fire with the associated smoke.

• Protect the cables from mechanical damage.

• Comply with local installation regulations that enable this fault to be ruled out.

In addition, apply one of the following measures:

• Use cables with double insulation.

• Maintain adequate clearance, using spacers, for example.

• Route the cables in separate cable ducts or pipes.

dV/dt filter plus Voltage Peak Limiter

Operating Instructions, 11/2013, A5E32847105B AA

Connecting a du/dt filter plus Voltage Peak Limiter

Connection to the DC link

(DCPS/DCNS)

Line voltage 380 V – 480 V 3 AC

WARNING

[mm²]

Electrical installation

Connection between du/dt reactor and

voltage peak limiter

(1U2, 1V2, 1W2) [mm²]