Siemens SINAMICS G130 Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SINAMICS G130. Siemens SINAMICS G130 22 pages. Line filter
Également pour Siemens SINAMICS G130 : Manuel d'utilisation (24 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (31 pages), Manuel d'utilisation (30 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (30 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (30 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (42 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (30 pages), Manuel d'utilisation (42 pages), Manuel d'utilisation (38 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (24 pages)

Imprimer la page

Siemens SINAMICS G130 Manuel d'utilisation

General

CAUTION

Provisions for component cooling must be made at the installation site. Power loss data are

given in the technical specifications.

Assignment of sine-wave filter and Power Module

Table 2- 1

6SL3310-1GE32-1AAx

6SL3310-1GE32-6AAx

6SL3310-1GE33-1AAx

6SL3310-1GE33-8AAx

6SL3310-1GE35-0AAx

6SL3310-1GF31-8AAx

6SL3310-1GF32-2AAx

Restrictions

The following restrictions must be taken into account when a sine-wave filter is used:

● The output frequency is limited to max. 115 Hz (at 500 – 600 V) and 150 Hz (at 380 – 480

● The modulation type is permanently set to space-vector modulation without

● The maximum output frequency is limited to 85% of the input frequency.

● Maximum permissible motor cable lengths:

● During commissioning, the pulse frequency rises to double the factory setting. This

Note

If a filter cannot be parameterized (p0230 ≠ 3) during commissioning, then no provision is

made for this SIEMENS sine-wave filter for the SINAMICS G130.

Assignment of sine-wave filter and Power Module

Power Module

V).

overmodulation.

– Unshielded cable: max. 450 m

– Shielded cable: max. 300 m

induces current derating, which must be applied to the built-in units' rated currents listed

in the technical specifications.

Unit rating of the Power Module

Line voltage 380 – 480 V 3 AC

110 kW

132 kW

160 kW

200 kW

250 kW

Line voltage 500 – 600 V 3 AC

110 kW

132 kW

Suitable sine-wave filter

6SL3000-2CE32-3AA0

6SL3000-2CE32-8AA0

6SL3000-2CE33-3AA0

6SL3000-2CE34-1AA0

6SL3000-2CF31-7AA0

Operating Instructions, 05/2010, A5E00992420A

Sine-wave filter