Siemens SINAMICS G130 Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SINAMICS G130. Siemens SINAMICS G130 30 pages. Line filter
Également pour Siemens SINAMICS G130 : Manuel d'utilisation (24 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (31 pages), Manuel d'utilisation (30 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (30 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (30 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (26 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (42 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (42 pages), Manuel d'utilisation (38 pages), Manuel d'utilisation (46 pages), Manuel d'utilisation (28 pages), Manuel d'utilisation (22 pages), Manuel d'utilisation (24 pages)

General

NOTICE

Damage to the Motor Module by using components that have not been released

When using components that have not been released, damage or malfunctions can occur

at the devices or the system itself.

• Only use motor reactors that SIEMENS has released for SINAMICS.

NOTICE

Risk of damaging the motor reactor by exceeding the maximum output frequency

The maximum permissible output frequency when a motor reactor is used is 150 Hz. The

motor reactor can be damaged if the output frequency is exceeded.

• Operate the motor reactor with a maximum output frequency of 150 Hz.

NOTICE

Damage to the motor reactor if the maximum pulse frequency is exceeded

The maximum permissible pulse frequency when a motor reactor is used is 2.5 kHz or 4

kHz. The motor reactor can be damaged if the pulse frequency is exceeded.

• When using the motor reactor, operate the Motor Module with a maximum pulse

NOTICE

Damage to the motor reactor if it is not activated during commissioning

The motor reactor may be damaged if it is not activated during commissioning.

• Activate the motor reactor during commissioning via parameter p0230 = 1.

Note

Cable lengths

Keep the connecting cables to the Power Module as short as possible (max. 5 m).

frequency of 2.5 kHz or 4 kHz.

Operating Instructions, 11/2017, A5E00409660A

Motor reactors