Siemens SINUMERIK 808D Manuel d'entretien - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 46 pages. Connecting with v60 driver
Également pour Siemens SINUMERIK 808D : Manuel d'utilisation (34 pages), Manuel d'entretien (48 pages), Instructions (2 pages), Manuel d'installation (48 pages)
Imprimer la page
Service case
of hardware
fault
Overload
Fault description:
The machine cannot move or moves difficultly because of overload (the
drive may issue an overload alarm).
Diagnostic steps
Check whether the guide lubrication is sufficient
1. Whether the tubing/nozzle is unimpeded.
2. Whether the setting of the lubrication interval time is sufficient (the
interval should not be too long).
Stop the machine and check whether the guides / the screw are blocked by
the machining waste. If so, it may need proper cleaning.
Check the connection of the shaft coupling
1. Whether the connection is too tight.
2. Whether the connection is concentric.
Service guide
page 20
808D turning and milling