Siemens SINUMERIK 828D Turning Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SINUMERIK 828D Turning. Siemens SINUMERIK 828D Turning 49 pages. Output of setpoints to analog drives - retrofit solution
Également pour Siemens SINUMERIK 828D Turning : Instructions de connexion (16 pages)

Imprimer la page

1. Schematic Diagram

Legal information

Using the application examples

The application examples illustrate the solution of automation tasks with the interaction of several

components in the form of text, graphics and/or software blocks. The application examples are a

free-of-charge service provided by Siemens AG and/or a subsidiary company of Siemens AG

("Siemens"). They are not binding and do not claim to be complete or functional with regard to

configuration or equipment. The application examples do not represent customer-specific

solutions, but rather, only provide help for typical tasks. You are responsible for the proper and

safe operation of products in compliance with the applicable regulations. You must check the

function of the associated application example and adapt it specifically to your system.

Siemens grants you the non-exclusive, non-sublicensable and non-transferable right of use of the

application examples by professionally trained personnel. Any change to the application examples

is made purely at your own risk. Transfer to third parties or duplication of the application examples

or extracts thereof is permitted only in combination with your own products. The application

examples do not necessarily undergo the usual tests and quality checks of a paid product, may

contain functional and performance defects and may be subject to errors. You are fully

responsible for ensuring that the application examples are used in such a way that any defective

functions do not lead to property damage or injury to persons.

Disclaimer of liability

Siemens excludes any liability, irrespective of the legal ground, in particular for the usability,

availability, completeness and freedom from defects of the application examples, as well as

associated notes, configuration data and performance data and any damage caused by these.

This shall not apply in cases of mandatory liability, for example under the German Product

Liability Act, or in cases of intent, gross negligence or culpable loss of life, bodily injury or damage

to health, non-compliance with a guarantee, fraudulent non-disclosure of a defect or culpable

breach of material contractual obligations. The claims for compensation for the breach of essential

contractual obligations are, however, limited to the foreseeable damage typical for the type of

contract, except in the event of intent or gross negligence or death or injury or health impairment.

The above provisions do not imply a change in the burden of proof to your detriment. You exempt

Siemens from any third-party claims that may exist or arise in this connection, unless Siemens is

compulsorily liable by law.

By using the application examples, you agree that Siemens cannot be made liable for any

possible damage beyond the liability provisions described.

Additional notes

Siemens reserves the right to make changes to these application examples at any time without

prior notice. In cases of discrepancies between the suggestions in the application examples and

other Siemens publications, such as catalogs, then the content of the other documentation shall

have precedence.

In addition to this, the Siemens terms and conditions of use apply

(https://support.industry.siemens.com).

Security information

Siemens provides products and solutions with industrial security functions that support the secure

operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is necessary

to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept.

Siemens products and solutions constitute only one element of such a concept.

Customers are solely responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected to

an enterprise network or the Internet if and to the extent such a connection is necessary and only

when appropriate security measures (e.g. firewalls and/or network segmentation) are in place.

Additionally, Siemens recommendations on appropriate security measures should be carefully

taken into account. For additional information on Industrial Security, please visit:

https://www.siemens.com/industrialsecurity.

Siemens' products and solutions undergo continuous development to make them more secure.

Siemens strongly recommends that product updates are applied as soon as they are available

and that the latest product versions are used. Use of product versions that are no longer

supported, and failure to apply latest updates may increase customer's exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed

under: https://www.siemens.com/industrialsecurity.

Sollwertausgabe an analoge Antriebe

Entry ID: 109761423,

V1.0,

10/2018