Siemens SIWAREX WL270 CP-S SA Manuel d'utilisation - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SIWAREX WL270 CP-S SA. Siemens SIWAREX WL270 CP-S SA 38 pages. Mounting plates cp-s sa
Également pour Siemens SIWAREX WL270 CP-S SA : Manuel d'utilisation (40 pages)

Imprimer la page

Siemens SIWAREX WL270 CP-S SA Manuel d'utilisation

5.2

Installing mounting plates

5.2.1

General installation information

The installation conditions vary widely. The dead load of the load bearing implement can be

very low or relatively high. You might be dealing with a container, platform or a roller

conveyor. The following installation instructions can therefore only describe the general

procedures.

Always set up the load bearing implement on dummies in order to protect the load cells from

damage during installation.

The load bearing implement then only has to be raised a few millimeters from bracket to

bracket in order to position the load cell, pressure piece set and mounting plates. The

following description of the installation is based on this assumption.

Note

Maintenance-friendly design

When planning the layout, ensure that the load cells are easily accessible once they are

installed.

Depending on the installation conditions, the detailed procedure may deviate from the

following description.

5.2.2

Overview

The following actions are required to install the mounting plates.

1. Preparing the load cell and pressure piece set

2. Preparing the mounting plates

3. Installing the load cell, pressure piece set and mounting plates

4. Checking the installation

The actions are described in detail in the following.