Digital Extender HD-D102N Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digital Extender HD-D102N. Digital Extender HD-D102N 11 pages. 1x2 hdmi distribution amplifier

Imprimer la page

Video Connection

1. Connect your video source's HDMI output port to the HD-D102N's HDMI input port using standard

HDMI cables (not included). Make sure all your HDMI source and the displays are turned off

before connecting the cables.

2. Connect your HDMI display's HDMI input port to HD-102N's HDMI output port. Make sure your

HDMI display is turned off before connecting the cables.

3. Plug the 5V power supply into the switch's power input port.

4. Plug the 5V wall mount power supply into the wall outlet.

5. Turn on Distributor power.

6. Turn on your displays.

7. Turn on your video source.

EDID Set up

I. EDID Set up

1, Disconnect all HDMI cable,

2, Connect Monitor or HDTV to "OUTPUT 1" back panel of Distributor

3, Turn on distributor and HDTV power

4, Push the" EDID" button in front of HD-D102N (3 sec)

until GREEN LED light is on.

5, Turn off distributor

6, Reconnect all device follow the "Video Connection"

****

EDID [Extended Display Indentification Data]

EDID is defined by a standard published by the Video Electronics Standards Association (VESA). The

EDID includes manufacturer name, product type, phospher or filter type, timings supported by the display,

display size, luminance data and (for digital displays only) pixel mapping data.