Digital Foci PHOTO SAFE PSF-250 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digital Foci PHOTO SAFE PSF-250. Digital Foci PHOTO SAFE PSF-250 2 pages. Portable photo storage with memory card reader

Imprimer la page

Powering Photo Safe

NOTE: Photo Safe ships with battery pre-installed for your

convenience.

Charging the Battery

For best battery performance, charge the new battery

for 6 hours with the included AC power adapter.

The on-screen battery icon will flash to indicate that the

battery is charging. When the battery is fully charged,

the battery icon will stop flashing and show 3 full bars.

NOTE: If the battery does not charge automatically (i.e. battery

icon is not flashing) when connected to the AC adapter,

press the [POWER] button to start the charging operation.

NOTE: To ensure stable power supply, always use AC power

when your Photo Safe is connected to your computer by USB.

Copying Photos from Memory Card to Photo Safe

1. Power on Photo Safe by pressing the [POWER] button for

3 seconds. The LCD will turn on, and the {INSERT CARD}

icon will flash, prompting you to insert a memory card.

INSERT

CARD

BATT

2. To see the available hard drive space on Photo Safe,

press the [ENTER /

] button.

BATT

FREE

3. Insert the memory card into its designated slot with the

label side of the card facing up.

Note: Adapters required for miniSD, RS-MMC, MS Duo/PRO Duo.

MS/SD/MMC/xD

CF/MicroDrive

4. Once the memory card is inserted, Photo Safe will display

the memory card type and amount of data on the card.

The {COPY} icon will flash, indicating that Photo Safe is

ready for backup.

COPY

BATT

USED

Power On/Off

To turn on Photo Safe, press and hold the [POWER] button for

3 seconds. The LCD will turn on.

To turn off Photo Safe, press and hold the [POWER] button for

3 seconds. As a battery saving feature, Photo Safe turns off

automatically after 30 seconds of inactivity.

Installing New Battery

1. Remove the battery cover on Photo Safe by pressing down

the battery door button and pushing the door outward.

2. Remove the transparent film wrap from the Li-Ion battery.

3. Insert the Li-Ion battery into the battery compartment by

matching the gold connectors at the top.

4. Replace the battery door and make sure it is closed firmly.

5. Press the [ENTER /

] button to start the copy task. The Card

LED will blink to indicate that the memory card is being

accessed and copy is in progress. Photo Safe will display the

percentage of the total copy task completed as it progresses.

COPY

BATT

6. When copy is completed, you will see copy confirmation {OK}

and {100%}, indicating that data on the card has been copied.

COPY

BATT

7. By pressing and holding the [ENTER /

] button, the screen

will toggle between:

(a) the total number of files copied, and

(b) the folder number created to which the files are copied.

COPY

BATT

FILE COPIED

FOLDER

8. You may remove the memory card and turn off the device

by pressing the [POWER] button for 3 seconds until the

LCD turns off. Photo Safe also has a battery saving feature

that turns off automatically after 30 seconds of inactivity.

NOTE: In the unlikely event that the data backup fails, the copy

operation will stop and the {ERROR} icon will be displayed.

You may choose to repeat the operation.

Accessing your Copied Files on Your Computer

Connecting Photo Safe to Your Computer

Connect Photo Safe to your computer with the included USB cable.

To ensure stable power supply, always use AC power adapter

when connecting Photo Safe to your computer by USB. When

connected, Photo Safe will display an USB icon on its screen.

Your computer will automatically recognize Photo Safe and

show 1 hard drive and 2 removable devices.

The 3 devices will be listed in this sequence:

(g:) CF/MD card slot (shown as a Removable Disk)

(h:) SD/MMC/MS/xD card slot (shown as a Removable Disk)

(i:) Photo Safe hard drive (labeled 'HARDDISK')

Once connected to your computer, Photo Safe becomes an

external hard drive and multi-format memory card reader/writer.

You can access files on Photo Safe and inserted memory cards

with your computer, and you can transfer files between Photo

Safe, inserted memory cards, and your computer.

Additional Features

Deleting Memory Card Contents with Photo Safe

You can use Photo Safe to delete all the data on your memory card.

1. Insert the memory card in its designated slot. Note that the delete

feature will not be available if 2 cards are inserted at the same time.

2. Press the [POWER/SELECT] button

to switch to DELETE mode. The

{DEL} icon will flash , indicating that

Photo Safe is ready to delete the card.

3. Press and hold the [ENTER /

]

button for 3 seconds to execute

the delete operation.

4. When deletion is completed, you will see the screen

confirmation - {OK} and {100%}.

NOTE: You cannot delete files stored on the Photo Safe hard drive

directly. To delete files from the hard drive, connect Photo Safe to

your computer.

Copying from MS/SD/MMC/xD Card to CF Card

You can use Photo Safe to copy card content from a Memory

Stick, SD, MMC or xD-Picture Card onto a CompactFlash card.

BATT

MS / SD / MMC / xD

CF / MicroDrive

1. First, insert the card (Memory Stick, SD, MMC, or xD) with

the files you want to copy.

2. Next, insert the CF card to which you'd like to copy the files.

3. Press the [POWER/SELECT] button to switch the designated

copy location from HD to CF. Photo

Safe will show the CF indicator and

the free space on the CF card.

4. Press the [ENTER /

] button to start

copy. Data on your MS/SD/MMC/xD

card will be copied onto the CF card.

Locating your Copied Files on Your Computer

For each copy, Photo Safe creates a unique folder name

indicating memory card type and copy sequence number

for each card type to help you easily locate your files.

The created folder and copied contents will be located within

the default FILES folder on the Photo Safe hard drive.

Each 7-character folder name is made up of 2 parts:

(a) The first 2 characters are letters that indicate the

(Drive letters may vary)

type of memory card copied:

CF = CompactFlash, MicroDrive SD = Secure Digital

MS = Memory Stick formats

xD = xD-Picture Card

(b) The next 5 characters are sequential numbers,

starting from '00001', that indicate the order of the

folder created for the specific card format copied.

For example:

(Photo Safe Hard Disk): \ FILES \ CF00003\

Important Note about Formatting Photo Safe

Please note that the Photo Safe hard drive has to be

formatted in FAT32 format for Windows (or MS-DOS

file system for Mac), in order for the card copy function

to work. It will not work under NTFS format. Please

contact [email protected] if you need assistance.

DEL

Also note that formatting Photo Safe will delete all data

BATT

on your Photo Safe hard drive.

USED

Utilizing Multiple Partitions on Photo Safe

Photo Safe supports multiple partitions on its hard drive.

You can use this feature to help organize your copy tasks.

Before each copy task, you can select to which specific

partition to copy your memory card content.

1. Create multiple partitions on the Photo Safe hard drive

with a partition software. Make sure that the partitions

are formatted with FAT32 as primary partitions.

2. Turn on Photo Safe. Press the [ENTER /

and Photo Safe will show you the first partition and its

remaining hard drive space.

3. Press the [POWER/SELECT] button to select a different

partition. Photo Safe will show the active partition and

its free space. Press the [POWER/SELECT] button until

you see the desired partition for your copy task.

4. Insert your memory card into Photo Safe. Start the copy

task by pressing the [ENTER /

will be copied to the specific partition you selected.

FAQs & Firmware Update

Check the Digital Foci website (www.digitalfoci.com/support) for

COPY

Frequently Asked Questions and any available firmware updates.

BATT

Technical Support

If you have any questions about using your Photo Safe, please

contact Digital Foci technical support at: [email protected]

FREE

or call toll-free 1-888-669-3624

MC = MultiMedia Card

CompactFlash

3rd folder of

Format

CF card format copied

] button once,

] button. Your card content

Version 3.32-1