Epson 1735W - PowerLite WXGA LCD Projector Manuel de l'utilisateur - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson 1735W - PowerLite WXGA LCD Projector. Epson 1735W - PowerLite WXGA LCD Projector 42 pages. Esc/vp21 command business projectors
Également pour Epson 1735W - PowerLite WXGA LCD Projector : Manuel d'utilisation (47 pages), Liste des pièces (1 pages), Manuel d'installation rapide (4 pages), Manuel de l'utilisateur (1 pages), Brochure & Specs (2 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (12 pages), Bulletin d'information sur les produits (22 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (34 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages), Manuel de l'utilisateur (25 pages), Installation rapide (4 pages)

Imprimer la page
Epson 1735W - PowerLite WXGA LCD Projector Manuel de l'utilisateur
Monitoring window layout
*1 When Temperature level display group view is set to On at Environment
setup in the Tool menu, an icon indicating the internal temperature of the
projector will be displayed on top of the projector icon. The default setting
is Off.
*2 Check the following items.
- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Network Monitoring is set to ON or Standby Mode is set to
Network ON in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network.
*4 You can display Replace lamp at any time preset at Environment setup in
the Tool menu.
• The projector information that is generated when a problem is detected
is stored until EMP Monitor is closed. EMP Monitor displays will not
be updated automatically even if the projector status returns to normal.
Click "Refresh" in the main window to update the status.
• Detectable error information differs with the projector you are using.

Selecting display items

You can select only the required items to be displayed in Detail list view.
Procedure
A
Select "Option" from the View menu.
The Option window will be displayed.
B
Select the check box of the item you want to display.
C
Click "OK".
D
When all of the details of the item cannot be displayed in
Detail list view, drag the boundary line on the right of the
item name so that the view is extended to the desired width.
25