Samsung 5 Series Manuel de l'utilisateur - Page 2

Imprimer la page

Samsung 5 Series Manuel de l'utilisateur

Screen Frt: Displays the full image without any cut-off when your Preferred Language

те i s inputting HDMI (10801 ‫ ن‬l O SOp) or Component (10801/

1Q80p)HD signals.

HD (High Definition) has a 16:9 aspect ratio and 1080Ι/1080Ρ

(1920x1080) or 720p (1280x720) resolution.

You can adjust and store settings for each external device you

have connected to an input on the те. Picture Sizes available

by Input Source are listed below:

Digital channels only.

Digltal-те broadcasts can tra

Remote control buttons active on ttie cflannel tist screen.

* Green (Zoom): Enlarges or shrinks a channel number.

٠ Yellow (Select); Move the cursor to a channel. Press the Yellow

button to select the channel. A

select additional channels, then, open the fools menu and apply

a function to ttie channels you selected.

" Я (fools): Displays the Channel list tools menu, (the fools

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

mark appears. Repeat to

Air

If your те is connected to an antenna choose Air, and then press

ENTERO،. The те will automatically start memorizing channels.

nsmit many audio tracks

simultaneously (for example, simultaneous translations of a program

into foreign languages).

You can only select a language from among the ones being

broadcast.

Cable

If your те is connected to a cable outlet, choose Cable, and then

press ENTERO. Go to step 3.

Auto

If you choose Auto, and then press ENTERO, the те will

automatically select the correct Antenna source. Go to step 3.

3. On the Cable Type screen, use the -./►/Α/Τ buttons to

select the type of digital and analog cable systems you have:

STD, HRC, or IRC. Most systems are STD (Standard). When

done, select start, and then press ENTER o. The ет will start

memorizing channels.

Channel memorization can take up to 45 minutes,

depending on your cable system.

Memorized channels are added to the Added Channels

list. These are the channels you will see when you use the

Channel buttons on your remote.

Mutti-Track Sound (MTS)

Analog channels only.

■ Mono: Select for channels that are broadcasting in mono or if

you are having difficulty receiving a stereo signal.

‫ ا‬Stereo: Select for channels that are broadcasting in stereo.

■ SAP: Select to listen to the Separate Audio Program, which is

usually a foreign-

Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Autp ٧٥!ите

translation

Input Source

Picture Size

Icons

Meaning

16:9, Zoomi, ZoomZ,

A selected channel.

Ате, AV, Component (4801, 480ρ)

4:3

A Favorite channel.

DTV (10801, lOSOp), Component (10801,

1080Ρ), HDMl (10801, tOBOp)

16:9, Wide Fit, 4:3,

Screen Fit

A resereed program.

A program currently being broadcast.

Digital Noise Filter (Off / tow / Medium /High/ Auto) : It the

broadcast signal received by your те is weak, you can activate

the Digital Noise Filter feature to reduce any static and gtiosting

that may appear on the screen.

When the signal is weak, try all ttie Digital Noise Filter

options until the TV displays the best picture.

HDMI Black level (Normal / low) : For HDMI signals, select

the black level to adjust the screen depth, low make blacks look

the sound output when ttie modulation signal is high or by raising

the sound output when the modulation signal is low.

each station has its own broadcasting conditions, the

volume may fluctuate each time you change the channel. This

feature automatically adjusts the volume of a channel by lowering

darker.

TOOLS^

□ The Channe. List Tools Menu

The Channel list Tools menu contains most of the functions you

can use on the All cflannel. Added Channels, and Favorite list

screens. To view, select a list screen, select a channel, and then

press the TOOLS button.

■ Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

Clear Scrambled cflannel

Ilris function filters out scrambled channels after Auto Program is

completed. This process may take up to 20-30 minutes.

Press the ENTER Q‫ ؛‬button to stop the Clear Scrambled

Cliannel.

Tills function is only available in Cable mode.

Available only in HDMI mode (RGB signals).

Film Mode (Off / Auto) : Sets the те to automatically sense and

process film signals from all sources and adjusts the picture tor

optimum guality.

Available in AIV, DTV (interlace). AV, COMPONENT (4801 /

10801) and HDMI (4801/10801).

■ LED Motion Plus (Off/On): Removes drag from fast scenes

with a lot of movement to provide a clear picture.

Picture Reset

■ Picture Reset (Reset Picture Mode/Cancel): Resets the

picture settings to their faeton, defaults.

Sound Reset

To delete channels from the Added Channels list, follow these

steps:

1. Select one or more channels in the Added Channels list

using the Α/Τ buttons and tlie Yellow (Select) button on your

remote.

2. Press the TOOLS button on your remote. Itie Tools menu

appears.

3. Select Delete in the Tools menu, and then press the ENTERS

button.

To add channels to the Added Channels list, follow these steps:

1. Select one or more cliannels in the All Cliannels list using the

Α/Τ buttons and the Yellow (Select) button on your remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Add In the Tools menu, and then press the ENTERS

button.

All deleted channels will be shown on the All ctiannels list.

You add channels back to the Added cflannels list on the

All cflannels list.

A gray-colored channel indicates the channel has been

deleted from the Added cflannels list.

The Add menu option only appears for deleted channels.

И Add to Favorite/Delete from Favorite: lets you add channels to

and delete channels from your Favorites list.

To add channels to the Favorites list, follow these steps:

1. Select one or more channels in the All Channels/Added

Channels list using the A/▼ buttons and the Yellow (Select)

button on your remote.

2. Press the TOOLS button on your remote.' The Tools menu

appears.

3. Select Add to Favorite in the Tools menu, and then press the

ENTERQ button.

Reset All: Resets all sound settings to the factop, defaults.

□ Managing Channels

เ"

Channel Menu

cflannel List

See your list of Added ctiannels. Favorite channels, or channels

you've sctieduled for viewing. Add or delete Favorite channels, add

or delete channels from the Added Channels list, schedule channels

or programs for viewing. Watch a channel by selecting the channel

in the All Channels, Added Channels, or Favorite screen, pressing

the A /

buttons, and then pressing the ENTERÖ button.

□ Memorizing Channels

When you first set up your^ using Plug & Play, the TV

memorized the channels that were available over the air or through

your cable system and added them to the Channel List. The

Antenna and Auto program functions described below let you

re-run the channel memorization function without having to re-run

the Plug & Play procedure.

Antenna (Air/Cable)

Before your television can memorize the available channels, you

must select your те 'з signal source. Air (using an antenna) or

Cable. Select Menu >Channel > Antenna > Air or Cable. After

you have selected the signal source, go on to the Auto Program

function.

Selecting the signal source using the Antenna function also

determines the signal source the TV is tuned to. For example,

if you receive your TV signal over the air. and you select

Cable, you will see only snow. You must select Air to see a

picture.

Auto Program

The Auto Program function memorizes all channels that are

available over the air or through your cable system and adds them

to the Channel List.

To start Auto Program, follow these steps:

1. Push MENU Ш -» Channel » Auto Program ٠ ENTER и

on your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your те

signal.

Ill

Sound Menu

..Щ■

fri

,WK

Mode

■ standad: Selects the normal sound mode.

И Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Amplify: Increase the intensity of high-frequency sounds to allow

a better listening experience for the hearing impaired.

Equalizer

Available in standard sound mode only.

■ Balance t/R: Adjusts the balance between the right and left

speaker.

‫ ا‬lOOHz / 306Hz/IKHz/3ΚΗζ/lOKHz (Bandwidth

Adjustment): Adjusts the loudness of specific bandwidth

frequencies.

" Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

Available in standard sound mode only.

SRS TruSurround HD is a patented SRS technology that solves

the problem of playing 5.1 multichannel content through two

speakers. IruSurround delivers a compelling, virtual surround

sound experience through any two-speaker playback system,

including internal television speakers. It is ftjlly compatible with all

multichannel formats.

V fri

,TVK

,tv،ò

11٠1

,Wffll

Zoom

I Tools

Channel List Screens icons are listed on the left side. Select an

icon usino the A,▼ buttons to view each list.

All Channels: Shows all currently available channels including

those you deleted from the Added Channels list.

I Added Channels: Shows all Added Channels. These are the

channels that appear when you press ttie CH button.

V Favorite: Shows all favorite channels.

٠ Programmed: Shows all channels and programs currently

scheduled using Timer Viewing.

‫ا‬